海口附近有没有服务

Manufacturers of cyclone screening equipment Vibration screening
24 hour hotline: 400-606-3160
Your location: home page > News Center > Industry trends

How to prevent and solve the failure of high frequency dehydration screen in the production line

Author: Time: July 23, 2020 127 views

The high-frequency dehydration screen is a high-efficiency composite high-frequency dewatering screen, which is based on the advantages of traditional dewatering screen equipment and improved. It is the core equipment of construction, mining, metallurgy industry, highway, railway, bridge, hydropower, mineral grinding and mechanical dehydration industry To solve the problem of high frequency screen in the production line:

1、 Abnormal vibration of high frequency dewatering screen in production process

1. High frequency dehydration screen into the material is too large, you can check the feed particle size.

2. The abrasion of high frequency dewatering screen screen is uneven. Check the wear of screen and alloy sieve plate. Repair the screen and screen plate if there is wear, and replace it if necessary.

3. The screen screen of high frequency dewatering screen is unbalanced, so it needs to be adjusted.

4. If the foundation of high frequency dewatering screen is not properly treated, check the anchor bolts and tighten them.

 High frequency dewatering screen

2、 Too large discharge particle of high frequency dewatering screen

1. Check the wear of alloy sieve plate of high frequency dehydration screen, and repair or replace the alloy sieve plate.

2. Check the abrasion of the side impact plate of the high frequency dehydration screen and replace it if necessary.

3. Check the feed particle size of high frequency dehydration screen, too large feed particle will also affect the discharge particle size.

3、 High frequency dewatering screen bearing heating

1. If the bearing of high frequency dehydration screen is short of oil, check and add oil in time; if the oil is too much, the bearing will be heated, so the oil level must be checked.

2. High frequency dehydration screen bearing damage, check and timely replace the bearing.

3. If the upper cover of the bearing body of the high frequency dewatering screen is too tight, the bolts should be adjusted properly and the tightness should be appropriate.

4、 High frequency dewatering screen belt overturning

1. It indicates that the belt of high frequency dehydrating screen is worn and needs to be replaced.

2. Belt conveyor assembly problem, need to adjust the pulley in the same plane.

3. Check the quality of the V-belt itself.

 Manufacturer of high frequency dewatering screen

The above is for high-frequency dehydration screen in the dehydration production line failure and solutions for you to make the relevant answers, I believe it will help dehydration plants to further improve production efficiency, reduce equipment failure rate, a new era, a new starting point! For high-frequency dehydration screen plant, in addition to do a good job in the technology and quality of equipment, but also to a large extent stand in the perspective of users to consider, for dehydration equipment users, to improve productivity and reduce cost is the top priority in the production process.